Learn the difference between 3-tab and architectural / laminated asphalt roofing shingles. Visit http://www.AsphaltShingles.org for more information.
Video Rating: 5 / 5
Roof planes that butt against vertical walls at the end of the shingle course are protected by metal step flashing at least 125 mm high and 125 mm wide (5″ h…
Get A Drywall Company In Louisiana To Give You A Quote Call 504.327.5840 Ext. 2
8 Comments
Sentry Exteriors · September 22, 2014 at 10:17 PM
Roofers Serving Charlottesville
Jacno77 · September 22, 2014 at 11:00 PM
one big commercial, what a load of crap
Jeffrey Hambro · September 22, 2014 at 11:37 PM
$350
The Bowzer · September 23, 2014 at 12:10 AM
what is the additional cost per square? I want to tear off and re-roof my
Florida home this winter. Small home, not a high pitch at all. Cost. How
much more per square does all this quality in a shingle cost? Very
important. Come back.
shadyirishmen · September 23, 2014 at 12:30 AM
Have you seen a Malarkey Roofing shingle yet? It’s the only shingle that
has a true wide nailiing area of 1-5/8″ because the bottom of the shingle
(shim) actaully overlaps the top (dragon tooth) by 1-5/8″. The Owens
Corning Duration only overlaps top to bottom by 5/8″ so it’s the same as
all the other shingles, if you only nail high in the “Surenail” location
you will miss the bottom shingle and potentially have failures after a few
years when the sealant begins to de-laminate. Check it out
Jeffrey Hambro · September 23, 2014 at 12:43 AM
$350
The Bowzer · September 23, 2014 at 1:23 AM
what is the additional cost per square? I want to tear off and re-roof my
Florida home this winter. Small home, not a high pitch at all. Cost. How
much more per square does all this quality in a shingle cost? Very
important. Come back.
shadyirishmen · September 23, 2014 at 1:29 AM
Have you seen a Malarkey Roofing shingle yet? It’s the only shingle that
has a true wide nailiing area of 1-5/8″ because the bottom of the shingle
(shim) actaully overlaps the top (dragon tooth) by 1-5/8″. The Owens
Corning Duration only overlaps top to bottom by 5/8″ so it’s the same as
all the other shingles, if you only nail high in the “Surenail” location
you will miss the bottom shingle and potentially have failures after a few
years when the sealant begins to de-laminate. Check it out
Comments are closed.